PRICES include / exclude VAT
Homepage>BS Standards>35 INFORMATION TECHNOLOGY. OFFICE MACHINES>35.220 Data storage devices>35.220.21 Magnetic disks>BS 7023-1:1988 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides Dimensional, physical and magnetic characteristics
Sponsored link
immediate downloadReleased: 1989-02-28
BS 7023-1:1988 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides Dimensional, physical and magnetic characteristics

BS 7023-1:1988

Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides Dimensional, physical and magnetic characteristics

Format
Availability
Price and currency
English Secure PDF
Immediate download
249.60 EUR
You can read the standard for 1 hour. More information in the category: E-reading
Reading the standard
for 1 hour
24.96 EUR
You can read the standard for 24 hours. More information in the category: E-reading
Reading the standard
for 24 hours
74.88 EUR
English Hardcopy
In stock
249.60 EUR
Standard number:BS 7023-1:1988
Pages:28
Released:1989-02-28
ISBN:0 580 16914 6
Status:Standard
DESCRIPTION

BS 7023-1:1988


This standard BS 7023-1:1988 Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96 tpi) on both sides is classified in these ICS categories:
  • 35.220.21 Magnetic disks

This part of ISO 8378 specifies the dimensional, physical and magnetic characteristics of the cartridge so as to provide physical interchangeability between data processing systems.

NOTE Numeric values in the SI and/or Imperial measurement system in this part of ISO 8378 may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor re-converted. The original design was made using Imperial units and further developments were made using SI units.


Dimensional, physical and magnetic characteristics.