CSN ETSI EN 301 443 V2.1.1

CSN ETSI EN 301 443 V2.1.1 The present document applies to any Very Small Aperture Terminal (VSAT) which has the following characteris-tics: " the VSAT is operating in one or more frequency ranges within the following bands allocated to the Fixed Satellite Service (FSS), shared with other services, e.g. the Fixed Service (FS) and the Mobile Service (MS): 5,850 GHz to 7,075 GHz (earth to space); 3,400 GHz to 4,200 GHz (space to earth); " the VSAT uses linear or circular polarization; " the VSAT operates through a geostationary satellite at least 3° away from any other geostationary satellite operating in the same frequency band and covering the same area; " the VSAT antenna diameter does not exceed 7,3 m, or equivalent effective area; " the VSAT is either: a transmit only VSAT: designed for transmission only of radio communications signals in the frequency band (earth to space) specified above; or a transmit and receive VSAT: designed for transmission and reception of radio communications signals in the frequency bands specified above; or a receive only VSAT: designed for reception only of radio communications signals in the frequency band (space to earth) specified above; " the VSAT is designed usually for unattended operation; " the VSAT is operating as part of a satellite network (e.g. star, mesh or point to point) used for the distri-bution and/or exchange of information between users; " the transmit only and transmit and receive VSAT is controlled and monitored by a Centralized Control and Monitoring Function (CCMF). The CCMF is outside the scope of the present document. The present document applies to the VSAT with its ancillary equipment and its various terrestrial ports, and when operated within the boundary limits of the operational environmental profile declared by the applicant and when installed as required by the applicant by declaration or in the user documentation. The present document is intended to cover the provisions of Directive 2014/53/EU (RE Directive) [6] article 3.2, which states that "... radio equipment shall be so constructed that it both effectively uses and supports the effi-cient use of radio spectrum in order to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential re-quirements under other parts of article 3 of the RE Directive [6] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org/.
Original English text of CSN EN Standard.
The price of the Standard included all amendments and correcturs.